audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator > < Radiator and radiator fans

A3 Mk2

Radiator and radiator fans - exploded view
   
Radiator and radiator fans - exploded view
1 - Radiator fan -V7-
q   With radiator fan control unit -J293-
q   Removing and installing → Chapter
2 - Nut
q   5 Nm
3 - Radiator cowl
q   Removing and installing → Chapter
4 - Coolant hose (top)
q   Lift retaining clip to detach
q   Connecting to radiator → Fig.
5 - O-ring
q   Renew
6 - Radiator
q   Removing and installing → Chapter
q   If renewed, refill system with fresh coolant
7 - O-ring
q   Renew
8 - Coolant hose (bottom)
q   Lift retaining clip to detach
q   Connecting to radiator → Fig.
9 - Bolt
q   5 Nm
10 - Nut
q   5 Nm
11 - Bolt
q   5 Nm
12 - Radiator fan 2 -V177-
q   Removing and installing → Chapter

   
Connecting coolant hose with plug-in connector
–  Remove old O-ring -2- from coolant hose -3-.
–  Lightly lubricate new O-ring with coolant and fit O-ring in coolant hose.
–  Press coolant hose onto connection -1- until it engages audibly.
–  Press coolant hose in again and then pull to check that plug-in connector is correctly engaged.
  A19-10572

Removing and installing radiator > < Radiator and radiator fans