Audi Workshop Service and Repair Manuals

Separating engine from direct shift gearbox Special tools and workshop equipment required

t  Workshop hoist -VAS 6100-

t  Retainer -T10013- t  Bolt M8x40 with nut and washer with Ø 30 mm

Procedure l  Engine/gearbox assembly removed and attached to engine bracket -T10012-. –  Disconnect coolant hoses -arrows- at ATF cooler.

–  Remove the pin from retainer -T10013-; to do so, remove circlip. –  Secure retainer -T10013- to gearbox lifting eye with a bolt M8x40 -item 1- and washer Ø 30 mm. –  Attach workshop hoist -VAS 6100- to retainer -T10013-.

–  Remove bolts -1- and -2-. –  Remove starter from gearbox.

–  Remove bolts -1- and -3 ... 10- on engine/gearbox flange. –  Separate gearbox from engine.