A3 Mk2
| Exhaust gas recirculation cooler - exploded view |
| 1 - | 22 Nm |
| 2 - | Connecting pipe for exhaust gas recirculation |
| 3 - | Gasket |
| q | Renew |
| 4 - | Change-over flap for exhaust gas recirculation cooler |
| q | Directs exhaust gas through exhaust gas recirculation cooler when activated |
| q | Checking exhaust gas recirculation change-over → Chapter |
| 5 - | To mechanical exhaust gas recirculation valve |
| 6 - | Exhaust gas recirculation cooler |
| q | Removing and installing → Chapter |
| 7 - | Bracket |
| q | For change-over flap and exhaust gas recirculation cooler |
| 8 - | 10 Nm |
| 9 - | Bracket |
| q | For engine cover |
| 10 - | 10 Nm |
| 11 - | 10 Nm |
| 12 - | From exhaust manifold |
| 13 - | Gasket |
| q | Renew |
| 14 - | Connecting pipe for exhaust gas recirculation |
| q | When installing observe tightening sequence → Fig. |
| 15 - | Nut |
| q | Tightening sequence → Fig. |
| 16 - | Bolt |
| q | Tightening sequence → Fig. |
| 17 - | Gasket |
| q | Renew |
| 18 - | 10 Nm |
|
|
