audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing bracket for ancillaries > < Removing and installing poly V-belt tensioner for air conditioner compressor

A3 Mk2

Removing and installing poly V-belt tensioner for alternator and coolant pump
Removing and installing poly V-belt tensioner for alternator and coolant pump
   
Removing
–  Disconnect hose -1- at activated charcoal filter (press release tab) and move hose clear.
  Note
Disregard -item 2-.
  A10-10762
–  Release activated charcoal filter -arrow B-, lift off -arrow A- and move clear to one side with hose -1- connected.
  Note
Disregard -item 2-.
  A20-10511
–  To slacken poly V-belt turn tensioner in clockwise direction -arrow-.
–  Remove poly V-belt from alternator and release tensioner.
  A13-10749
–  Remove bolt -arrow- and take off tensioner.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „Poly V-belt drive, bracket for ancillaries - exploded view“
–  Install poly V-belt for alternator and coolant pump → Chapter.
  A13-10703

Removing and installing bracket for ancillaries > < Removing and installing poly V-belt tensioner for air conditioner compressor