Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
4-cylinder direct petrol injection engine (1.2 ltr. 2-valve turbo), mechanics >
< Removing and installing Hall senderG40
A3 Mk2
Power unit
Direct petrol injection and ignition system (4-cyl. 1.2 ltr. 2-valve turbo with timing chain)
Ignition system, glow plug system
Servicing ignition system
Removing and installing engine speed senderG28
Removing and installing engine speed senderG28
Removing and installing engine speed sender -G28-
Special tools and workshop equipment required
t
Socket -T10370-
Removing
The fitting location of the engine speed sensor is below the intake manifold on the crankshaft sealing flange (flywheel end).
–
Detach electrical connector
-arrow-
at engine speed sender -G28-.
–
Unscrew securing bolt for engine speed sender -G28- using socket -T10370-.
–
Pull out engine speed sender -G28-.
Installing
–
Install engine speed sender -G28-.
l
Tightening torque: refer to exploded view of ignition system
→ Chapter
.
Power unit
Direct petrol injection and ignition system (4-cyl. 1.2 ltr. 2-valve turbo with timing chain)
Ignition system, glow plug system
Servicing ignition system
Removing and installing engine speed senderG28
4-cylinder direct petrol injection engine (1.2 ltr. 2-valve turbo), mechanics >
< Removing and installing Hall senderG40