audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing Hall senderG40 > < Ignition system - exploded view

A3 Mk2

Removing and installing knock sensor 1G61
Removing and installing knock sensor 1 -G61-
Removing
   
Knock sensor 1 -G61--3-
–  Remove intake manifold → Chapter.
–  Unplug electrical connector at knock sensor 1 -G61-.
–  Remove knock sensor 1 -G61-.
Installing
–  Install in reverse order.
–  Install intake manifold → Chapter.
l  Tightening torque: refer to exploded view of ignition system → Chapter.
  N10-10323

Removing and installing Hall senderG40 > < Ignition system - exploded view