audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing fuel gauge senderG - vehicles from approx. 10.2004 onwards > < Checking fuel gauge senderG

A3 Mk2

Removing and installing fuel gauge senderG - vehicles up to approx. 10.2004
Removing and installing fuel gauge sender -G- - vehicles up to approx. 10.2004
   
Removing
Observe safety precautions → Chapter.
Observe rules for cleanliness → Chapter.
–  Remove fuel delivery unit → Chapter.
  Caution
First release retainer tabs on connector contact before detaching electrical connectors on fuel gauge sender -G-.
–  Release retainer tabs on electrical connectors -1- and -2- and then detach electrical connectors.
–  Lift retaining tabs -3- and -4- with a screwdriver and pull fuel gauge sender -G- off downwards -arrow-.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert fuel gauge sender -G- into guides on fuel delivery unit and press upwards until it clicks into place.
–  Plug in electrical connectors and check that they have engaged properly.
–  Install fuel delivery unit → Anchor.
  A20-0706

Removing and installing fuel gauge senderG - vehicles from approx. 10.2004 onwards > < Checking fuel gauge senderG