audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
6-cylinder injection engine (3.2 ltr. 4-valve), mechanics > < Ignition system - exploded view

A3 Mk2

Removing and installing ignition coils
Removing and installing ignition coils
Special tools and workshop equipment required
   
t  Puller -T10095 A-
  W00-1301
t  Assembly tool -T10118-
  W00-1148
Removing
–  Detach electrical connectors at ignition coils by releasing tab -arrow- with assembly tool -T10118- and carefully pulling connector.
  N24-1533
–  Attach puller -T10095 A- to ignition coils as shown in illustration -arrow- and remove ignition coils one at a time.
  N28-0274
Installing
Installation is carried out in the reverse order; note the following:
–  Insert the ignition coils into the holes so that the flat edges align with one another -arrows-.
  N28-0275

6-cylinder injection engine (3.2 ltr. 4-valve), mechanics > < Ignition system - exploded view