A3 Mk2
| Removing and installing ignition system components |
| 1 - | Connector |
| q | Black, 4-pin |
| q | Release with assembly tool -T10118-. |
| 2 - | Ignition coils with output stage -(N70, N127, N291, N292)- |
| q | Removing and installing → Chapter |
| 3 - | Connector |
| q | Black, 2-pin |
| q | For knock sensor 1 -G61- |
| q | Connector contacts are gold-plated |
| 4 - | Knock sensor 1 -G61- |
| q | Connector contacts are gold-plated |
| 5 - | 20 Nm |
| q | Tightening torque influences the function of the knock sensor |
| 6 - | Connector |
| q | Black, 3-pin |
| q | For Hall sender -G40- |
| 7 - | Hall sender -G40- |
| 8 - | O-ring |
| q | Renew if damaged |
| 9 - | 10 Nm |
| 10 - | Spark plug |
| q | 30 Nm |
| q | Removing and installing → Booklet 808 |
| 11 - | Cable guide |
| q | Tighten to 5 Nm at camshaft housing |
| 12 - | Earth cable |
| q | Only loosen or tighten with ignition switched off. |
| 13 - | 10 Nm |
| q | Only loosen or tighten with ignition switched off. |
