audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Checking function of intake air preheating (control flap) > < Overview of fitting locations
Dismantling and assembling air cleaner
Dismantling and assembling air cleaner
  Note
t  The air filter element is integrated in the engine cover panel.
t  Checking function of intake air preheating (control flap) → Chapter
   
1 - Air cleaner (bottom section)
q   Clean any leaves and dirt out of bottom section of air cleaner
2 - Rubber bush
3 - Air filter element
q   Always use genuine part for air filter element
q   Observe change intervals → Booklet808
q   When installing the air filter element, check that it is properly centred in the retainer in the air cleaner (bottom section).
q   Fit the top section of the air cleaner carefully on the bottom section, without using force. Make sure the top section of the air cleaner is fitted straight on the air filter element (note position of sealing lip on air filter element).
4 - 3 Nm
5 - Intake air temperature sender 2 -G299-
6 - O-ring
q   Renew
7 - Air cleaner (top section)
q   Clean any leaves and dirt out of top section of air cleaner
8 - Vacuum hose
q   From camshaft housing

   

Checking function of intake air preheating (control flap) > < Overview of fitting locations