A3 Mk2
Air cleaner - exploded view |
1 - | Panel bolt |
2 - | Air duct |
q | Clean any leaves and dirt out of air duct |
3 - | Air funnel |
4 - | Panel bolt |
5 - | Spring-type clip |
6 - | Air pipe |
q | Check air intake for dirt and leaves |
7 - | Connection for crankcase breather |
8 - | Spring-type clip |
9 - | Air duct |
q | Check air intake for dirt and leaves |
10 - | Panel bolt |
11 - | Panel bolt |
12 - | Air cleaner housing |
q | Clean any salt residue, leaves and dirt out of air cleaner housing |
q | Clean dirt out of water drain in bottom section of air cleaner (this is important) |
13 - | Filter element |
q | Always use genuine part for air filter element |
q | Removing and installing → Chapter |
q | Observe change intervals → Booklet808 |
14 - | Hexagon flange nut |
15 - | Intake air duct |
q | Check air intake for dirt and leaves |
16 - | Spring-type clip |
17 - | Air pipe |
q | Check air intake for dirt and leaves |