A3 Mk2
Injectors with clamping piece - exploded view |
1 - | Injector |
q | If they are to be re-installed, the injectors, high-pressure fuel pipes and clamping pieces must always be re-fitted in their original positions (i.e. on the same cylinder). |
q | Removing and installing → Chapter |
2 - | Bolt for clamping piece |
q | Renew |
q | 8 Nm + 1/2 turn (180 °) further |
3 - | High-pressure connection |
q | Counterhold at high-pressure connection when loosening high-pressure pipes |
4 - | Retaining clip for return lines |
q | Renew |
q | Grease retaining clip lightly before fitting |
5 - | Copper seal |
q | Renew |