A3 Mk2
| Intake manifold - exploded view |
| 1 - | 22 Nm |
| 2 - | Lower connecting pipe for exhaust gas recirculation |
| q | When installing, first tighten finger-tight and then tighten to specified torque |
| 3 - | Gasket |
| q | Renew |
| 4 - | Gasket |
| q | Renew |
| 5 - | Changeover flap for exhaust gas recirculation |
| 6 - | 10 Nm |
| 7 - | 10 Nm |
| 8 - | Gasket |
| q | Renew |
| 9 - | Upper connecting pipe for exhaust gas recirculation |
| q | When installing, first tighten finger-tight and then tighten to specified torque |
| 10 - | 22 Nm |
| 11 - | 10 Nm |
| 12 - | 22 Nm |
| 13 - | Bracket |
| 14 - | 5 Nm |
| 15 - | Intake manifold |
| q | Removing and installing → Chapter |
| 16 - | O-ring |
| q | Renew |
| 17 - | Gasket |
| q | Renew |
| 18 - | Mechanical exhaust gas recirculation valve |
| 19 - | O-ring |
| q | Renew |
| 20 - | Intake manifold connection |
| q | With intake manifold flap motor -V157- |
| 21 - | 10 Nm |
| 22 - | 10 Nm |
| 23 - | Gasket |
| q | Renew |
| 24 - | 22 Nm |
| 25 - | Exhaust gas recirculation cooler |
| 26 - | 10 Nm |
| 27 - | Gasket |
| q | Renew |
| 28 - | 22 Nm |
| q | Renew |
