–
| Carefully pull air mass meter -G70- out of guide on air cleaner housing. |
To ensure the proper function of the air mass meter -G70- it is important to observe the following instructions. |
Note t
| If the air filter element is very dirty or wet, dirt or water could reach the air mass meter and affect the air mass value. This would lead to loss of power, since a smaller injection quantity is calculated. |
t
| Always use genuine part for air filter element. |
t
| Always renew seal if damaged (air leaks in intake system). |
t
| Use a silicone-free lubricant when installing the air hose and seal. |
t
| Hose connections and air pipes and hoses must be free of oil and grease before assembly. |
–
| Check for salt residue, dirt and leaves in air mass meter and air intake hose (engine intake side). |
–
| Check for dirt in air duct leading to air filter element. If necessary, clean salt residue, dirt and leaves out of air cleaner housing (top and bottom sections); wash out or use a vacuum cleaner as required. |
|
|
|