t
| Injection rate comparison meter -V.A.G 1348/2 B- |
t
| 4 lengths of hose (made up in the workshop) to fit return line connections on injectors |
WARNING t
| Always read rules for cleanliness and instructions for working on fuel system → Chapter. |
t
| Follow these instructions and rules for cleanliness before starting work and while working on the fuel system. |
|
Each injector normally has a relatively low return flow rate. If the return flow rate at one injector is relatively high compared to the other injectors, that injector is probably defective. |
–
| Clean all return line connections (with commercial cleaning solution or similar) before removing. |
–
| Dry all components after cleaning. |
|
|
|