audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing Hall senderG40 > < Removing and installing glow plugs

A3 Mk2

Removing and installing automatic glow period control unitJ179
Removing and installing automatic glow period control unit -J179-
   
Removing
–  Remove battery → Electrical system; Rep. gr.27.
  A27-0193
–  Remove bolts -arrows- and take out battery tray -1-.
  A27-10166
–  Pull out the relay carrier from under the electronics box in engine compartment -arrow-.
–  Pull automatic glow period control unit -J179--item 1- out of relay carrier below electronics box in engine compartment.
Installing
Installation is carried out in the reverse order; note the following:
–  Install battery → Electrical system; Rep. gr.27.
  A96-10170

Removing and installing Hall senderG40 > < Removing and installing glow plugs