t
| Thoroughly clean all unions and the adjacent areas before disconnecting. |
t
| Ensure proper seating of dowel sleeves for centralising suspension bracket and steering box when installing. |
t
| Place removed parts on a clean surface and cover them up to keep them clean. Use plastic sheeting or paper for this purpose. Do not use fluffy cloths. |
t
| Make sure to install clean parts: only remove replacement parts from packaging immediately prior to installation. |
t
| Use only the grease and sealants with the Part No. stated. |
t
| Carefully cover or seal open components if repairs are not to be carried out immediately. |
t
| Two different types of steering boxes were fitted in model year 2004. Notes on identification → Chapter. |
t
| A third steering box version was added in model year 2008. Notes on identification → Chapter. |
|
|
|