audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Adjusting toe setting at front wheels > < Adjusting camber at rear wheels

A3 Mk2

Adjusting toe setting at rear wheels
Adjusting toe setting at rear wheels
   
–  Unscrew nut -A- on bolted joint between lower transverse link and subframe and loosely screw on new nut.
–  Adjust toe setting by turning eccentric bolt -B-.
  Note
The maximum adjustment range is 90° to the left or right of the centre position.
–  Tighten nut -A-.
–  Tightening torques → Chapter
–  Check toe setting again after tightening nut -A- → Chapter.
  A44-0184

Adjusting toe setting at front wheels > < Adjusting camber at rear wheels