Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing socket for towing bracket - version 2 >
< Towing bracket
A3 Mk2
Vehicle electrics
Electrical system; General information
Lights, lamps, switches inside, anti-theft system
Towing bracket
Removing and installing socket for towing bracket - version 1
Removing and installing socket for towing bracket - version 1
Removing and installing socket for towing bracket - version 1
Removing
–
Switch off ignition and take out ignition key.
–
Unscrew bolts
-arrows-
.
–
Detach socket from retaining plate.
Socket with rear fog light cut-out contact switch -F216-:
–
Unplug connector
-2-
for rear fog light cut-out contact switch -F216- and press connector
-1-
out of trailer socket -U10-.
Socket without rear fog light cut-out contact switch -F216-:
–
Press multi-pin connector
-1-
out of socket
-2-
in direction of
-arrow-
.
Version 1:
–
Release retaining tabs
-arrows-
and then release the clips
-1-
and
-3 ... 5-
.
–
Remove frame from connectors
-2-
.
Version 2:
–
Release retaining tabs
-arrows-
and then release clips
-1, 2, 3, 4, 6, 7-
.
–
Remove frame from multi-pin connector
-5-
.
Installing
Installation is carried out in the reverse order; note the following:
Note
Make sure that seals
-1-
and
-3-
are not damaged.
–
Insert connectors
-4-
into frame
-2-
until they audibly engage.
Vehicle electrics
Electrical system; General information
Lights, lamps, switches inside, anti-theft system
Towing bracket
Removing and installing socket for towing bracket - version 1
Removing and installing socket for towing bracket - version 2 >
< Towing bracket