A3 Quattro L4-2.0L Turbo (CBFA) (2009)
Brake Pedal Assy: Service and Repair
Brake Pedal Assembly Overview, Automatic Transmission
Brake Pedal Assembly Overview, Automatic Transmission
CAUTION!
The brake pedal travel must not be restricted by additional floor coverings.
1 - Mounting bracket
2 - Nut, 25 Nm
3 - Brake Pedal Switch (F47 )
‹› Before installing brake light switch, the brake pedal must be clipped together with brake booster push rod => [ Brake Pedal and Brake Booster,
Separating ] See: Brake Pedal and Brake Booster, Separating
‹› Removing and installing, adjusting => [ Brake Light Switch ] See: Lighting and Horns/Brake Light Switch/Service and Repair
‹› Lubricate plunger head with polyurea grease (G 052 142 A2).
4 - Hex head bolt
5 - Brake pedal
‹› Removing and installing => [ Brake Pedal ] See: Brake Pedal
‹› Disconnect from brake booster => [ Brake Pedal and Brake Booster, Separating ] See: Brake Pedal and Brake Booster, Separating