A3 Quattro L4-2.0L Turbo (CBFA) (2009)
‹› On version "2", it is necessary to remove clamping washers - A - and clamp - C - and to disengage heat shield - B - from vehicle.
‹› The illustrations show the heat shield - B - with the engine removed.
-
If present and it becomes necessary, disengage heat shield - B - from bulkhead and set it aside (or remove it completely).
-
If equipped, slide back the thermal protective covers - D - and - E - so that it is possible to mount the Hose Clamps Up To 40 Mm (3093) - F -
onto the coolant hoses - A - and - B -.
-
Mark arrangement of coolant hoses - A - and - B -.