A3 Quattro L4-2.0L Turbo (CBFA) (2009)
‹› The notch on the vibration damper must line up with the arrow marking on the timing chain lower cover.
-
Remove vibration damper bolt using Counterhold ( T10355).
-
Install the vibration damper bolt and Thrust Piece (T10368).
CAUTION!
The engine could be destroyed.
‹› In order not to change the valve timing, the crankshaft must not be moved out of the "OT" position when the vibration damper bolt is
removed.
-
Pry out the sealing ring.
Installing
‹› Tightening specifications. Refer to => [ Ribbed Belt Drive Assembly Overview ] See: Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Ribbed Belt Drive Assembly Overview.
-
Clean running and sealing surface.
-
Remove the Thrust Piece (T10368).
-
Pull the sealing ring - arrow - using the Thrust Piece (T10354) and the vibration damper bolt in all the way.