A3 Quattro L4-2.0L Turbo (CBFA) (2009)
‹› Thickness of sealant bead: 2 to 3 mm
‹› Install the oil pan within 5 minutes after applying the silicone sealant.
‹› The sealant bead may not be thicker than specified, otherwise excess sealant could enter the oil pan and clog the oil intake tube.
-
Position the lower section of the oil pan immediately and tighten the bolts, tightening sequence. Refer to => [ Oil Pan, Lower Part, Tightening
Sequence ] See: Oil Pan and Oil Pump Assembly Overview.
‹› After installing oil pan, allow sealant to dry for approximately 30 minutes. Only after then may the engine oil be replenished.
-
Fill engine oil and check oil level.
The rest of the assembly is basically a reverse of the disassembling sequence.