A3 Quattro L4-2.0L Turbo (CBFA) (2009)
‹› See if the timing chain cover is deformed. Then mount the top section of the oil pan without any sealant and check the gap between the cover and
the top section. If the cover gets bent and cannot be installed correctly, replace it after the oil pan upper section has been installed.
-
Clean sealing surfaces, must be free of oil and grease.
-
Make sure the oil passages in the upper section of the oil pan and in the cylinder crankcase clean.
-
Cut tube nozzle at front marking (jet dia. approximately 3 mm).
-
Apply silicone sealant, as illustrated - arrows -, on the clean surfaces of the oil pan upper section and on the lower timing chain guard.
‹› Thickness of sealant bead: 2 to 3 mm