A3 Quattro L4-2.0L Turbo (CBFA) (2009)
-
Remove the air guide pipe by lifting the clamps - 1 and 2 -.
CAUTION!
Risk of destroying due to reversed running direction on a used ribbed belt.
‹› Before removing ribbed belt, marking running direction with chalk or felt-tip pen for reinstallation later.
-
To release ribbed belt tension, rotate tensioner in direction of - arrow -.
-
Secure tensioner with Locking Pin (T10060A).
-
Remove ribbed belt from vibration damper ribbed belt pulley.
-
Rotate the vibration damper using the Counter Hold Tool (T10355) into the "OT" position - arrow -.