A3 Quattro L4-2.0L Turbo (CBFA) (2009)
‹› In MY 2005 as a running change, reservoirs, that had two seals on the connections, were installed. Each a seal - B - and an o-ring - C -.
Installation is carried out in the reverse order, when doing this note the following:
Before installing fluid reservoir Refrigerant R134a - Servicing
-
Clean the contact surface on the condenser - C -
-
Replace O-ring seals - A - and - B - => [ Refrigerant Circuit O-Ring Seals ] See: Description and Operation/Refrigerant Circuit O-Ring Seals
-
Replace seals - B - and O-ring seals - C -.