A3 Quattro L4-2.0L Turbo (CBFA) (2009)
recirculating air mode is closed).
-
Insert motor - B - into mounts - C - in opposite direction of arrow and onto toothed gear - D -.
-
So that toothed gear on motor - A - can be slid on toothed gear of fresh/recirculating air door, short tooth - C - of motor toothed gear must align
with short tooth interval - D - of toothed gear on shaft of fresh/recirculating air door - D -.
-
Install the wiring harness so that it cannot come in contact with any moving parts (e.g. the actuating arm of the control motor).
-
Install the bracket - A -, take special care when doing this, that bracket guide - D - is inserted correctly into intake housing mount - E - and bracket
is engaged correctly in both catches - B - and - C -.