A3 Quattro L4-2.0L Turbo (CBFA) (2009)
Turn Signal Lamp: Service and Repair
Exterior Mirror Turn Signal Lamps, from 06.2008
Special tools, testers and auxiliary items required
‹› Pry lever (80 - 200)
‹› Protective gloves
Removing
CAUTION!
Risk of injury.
‹› Wear protective gloves.
‹› To protect the paint in the area around the mirror housing, tape it off with a soft cloth.
-
Press mirror glass - 1 - out of mirror adjusting unit - arrow - using Pry Lever (80 - 200 ).
-
Disconnect the mirror heating electrical connectors - 2 - and - 3 - on the rear side of the mirror glass - 1 -.
-
Unclip the electrical connector from the bracket - 5 -, if applicable.
-
Disconnect the electrical connector - 4 -.