A3 Quattro L4-2.0L Turbo (CBFA) (2009)
Fuel Gauge Sender: Testing and Inspection
AWD
Fuel Level Sensor 2, Checking
Special tools, testers and auxiliary items required
‹› Hand-held multimeter (V.A.G 1526C)
‹› Connector test set (V.A.G 1594C)
Test Sequence
-
Remove rear seat bench
-
Unclip retainers - arrows - of cover for left sealing flange.
-
Disconnect electrical harness connector - 1 - at locking flange.
‹› Ignore - 2 -.
Vehicles through approximately 11/2004:
‹› On vehicles with 2-wire technology, the connector for Fuel Level Sensor 2 (G169) is equipped with 2 terminals.
-
Connect multimeter between terminal - 1 - and - 2 - for resistance measurement.