A3 Quattro L4-2.0L Turbo (CBFA) (2009)
-
Disconnect the electrical connector - 2 -.
-
Release retaining clips - arrows - using small screwdriver and remove Rain/Light Recognition Sensor (G397) - item 1 -.
Installing
Install in reverse order of removal, observing the following:
-
Clean the rest of the sensor film off the windshield.
-
Clean the contact surface on the windshield with cleaning solution (D 009 401 04).
-
Press the grip surfaces - arrows - on the protective cap - 2 - together and remove it from the rain/light recognition sensor (G397) - item 1 -.
-
Spray the entire surface of the sensor film - 1 - with cleaning solution (D 009 401 04).