A3 Quattro L4-2.0L Turbo (CBFA) (2009)
Vehicle level sensor is available as replacement part only complete with coupling rod and upper and lower retaining plates.
-
On vehicles with Audi magnetic ride, reprogram control position.
Headlamp basic setting. Refer to => [ Level Control System Sensor Overview ] See: Level Control System Sensor Overview.
Removing
-
Separate connector - 1 -.
-
Remove bolts - 2 - and - 3 -.
-
Remove sensor.
Installing
Installation is in reverse order of removal, noting the following:
Tightening specifications: => [ Bolts ] See: Level Control System Sensor Overview
The sensor lever must face toward the outside of the vehicle.
-
On vehicles with Audi magnetic ride, reprogram control position.
-
Perform headlamp basic setting. Refer to => [ Level Control System Sensor Overview ] See: Level Control System Sensor Overview
Tightening specifications, refer to .