A3 Quattro L4-2.0L Turbo (CBFA) (2009)
29 - Diagonal Brace
‹› Only on Cabriolet
‹› The contact surfaces must be free of wax
‹› Removing and Installing, refer to => [ Diagonal Braces ] See: Diagonal Braces
30 - Bolt
‹› 90 Nm plus an additional 45° turn
‹› Always replace
‹› Cabriolet only
31 - Nut
‹› 90 Nm plus an additional 90° turn
‹› Always replace
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ] See: Service and Repair/Rear
Axle in Curb Weight Position
32 - Bolt
‹› Always replace