A3 Quattro V6-3.2L (BUB) (2008)
Front Door Panel: Service and Repair
Front Door Trim
Front Door Trim
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
‹› If the door trim is being replaced, see if Technical Product Information: 2005913 is applicable and if it needs to be used.
Removing
CAUTION!
Follow the safety precautions for front side airbag crash sensors (pressure sensors). Refer to => [ Front Side Airbag Crash Sensors Safety
Precautions ] See: Restraint Systems/Air Bag Systems/Impact Sensor/Service Precautions.
-
Switch off ignition and remove ignition key.
-
Carefully remove cover - 1 - from clips - arrow - with Trim Removal Wedge (3409).
-
Remove bolts - arrows -.
-
Remove door trim from door.
-
Remove door inside release mechanism release - 2 - on bracket and disengage end of cable - 1 - at inside door release mechanism.