A3 Quattro V6-3.2L (BUB) (2008)
Headliner: Service and Repair
Roof Reinforcement, Installing on Body
Roof Reinforcement, Installing on Body
Special tools, testers and auxiliary items required
‹› 1K adhesive (D 190 MKD A3)
-
Remove headliner. Refer to => [ Headliner ] See: Headliner.
Front Roof Reinforcement:
-
Apply adhesive bead - 6 - to roof reinforcement - 1 - as shown in illustration.
‹› The adhesive bead must not extend over the outer markings - 5 -.
-
Position roof reinforcement centered to outer sides and at distance - a - to front roof edge on body roof.
‹› Dimension - a - = 167 mm
-
Push roof reinforcement from inside onto body roof.
Rear Roof Reinforcement:
-
Apply adhesive bead - 3 - to roof reinforcement - 2 - as shown in illustration.
‹› The adhesive bead must not extend over the outer markings - 4 -.
-
Position roof reinforcement centered to outer sides and at distance - b - to rear roof pillar inner side on body roof.
‹› Dimension - B - = 187 mm
-
Push roof reinforcement from inside onto body roof.
All: