A3 Quattro V6-3.2L (BUB) (2008)
-
Lower headliner on left side of vehicle - arrow 1 -.
-
Pull headliner out through rear lid opening - arrow 2 -.
Installing
‹› Threaded holes on roof grab handle and sun visors must be cleaned of all locking compound residues after removing. Otherwise, new screws could
lock up when installed and shear off when removed again.
‹› They can be cleaned with a thread cutter.
‹› Replace self-locking screws.
-
Place rear glass roof panel cut-out mounting frame in roof cut-out.
-
Position headliner on right upper B-pillar trim.
-
Carefully raise headliner over left B-pillar trim.
-
Align headliner.