A3 Quattro V6-3.2L (BUB) (2008)
4
Screws
3.5 Nm
‹› Qty. 2
5
Omega clips
‹› Qty. 2
‹› Maintain installation position as shown in illustration
6
Front Ashtray
Removing
Manual Transmission:
-
Remove cover with selector lever boot. Refer to => [ Cover with Selector Lever Boot, Removing And Installing ].
Automatic Transmission:
-
Version I: Remove selector lever cover. Refer to => [ Version I: Selector Lever Cover, Removing And Installing ].
-
Version II: Remove selector lever boot and cover. Refer to => [ Version II: Selector Lever Boot And Cover, Removing And Installing ].
All:
-
Remove bolts - 4 - (Qty. 2).
-
Remove omega clips - 5 -.
-
Remove ashtray - 6 -.
Installing
To install, perform the steps used in removal in reverse order.
7
Center Console
8
Storage Compartment Trim
Removing: where applicable
-
Remove the heater controls or remove the Climatronic Control Module (J255) (A/C Control Head).
-
Unclip the storage compartment trim - 8 -.
Installing
To install, perform the steps used in removal in reverse order.
9
Cover Light Lens
‹› Clipped into storage compartment trim - 8 -
Cover with Selector Lever Boot, Removing And Installing