A3 Quattro V6-3.2L (BUB) (2008)
-
Remove bolts - 4 - (Qty. 2).
-
Remove omega clips - 5 -.
-
Remove the left or right handles. Refer to => [ Left and Right Grab Handle ] See: Left and Right Grab Handle
-
Remove lining mat - 3 -.
Installing
To install, perform the steps used in removal in reverse order.
3
Screws - 3.5 Nm
‹› Qty. 2
4
Omega Clips
‹› Qty. 2
‹› Maintain installation position as shown in illustration
5
Center Console
6
Storage Compartment Trim
Removing
-
Remove the heater controls. Refer to => See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T
-
Unclip the storage compartment trim - 6 -.
Installing
To install, perform the steps used in removal in reverse order.
Cover with selector lever boot, removing and installing
-
Open ashtray in center console.
-
Remove cover - 1 - with selector lever boot - 2 - upward.
To install, perform the steps used in removal in reverse order.
Version I: Selector Lever Cover