A3 Quattro V6-3.2L (BUB) (2008)
-
Remove the tunnel side trim, refer to=> [ Side Trim, Tunnel Side ] See: Service and Repair/Removal and Replacement/Front Manual Seats
-
Remove headrests, refer to=> [ Headrests with Locking Mechanism ] See: Service and Repair/Removal and Replacement/Front Manual Seats.
-
Remove headrest guides. Refer to=> [ Headrest Guide ]. See: Head Rest/Service and Repair/Overhaul/Front Seat Covers and Cushion/Headrest
Guide
-
Remove the entry assistance.
-
Remove backrest panel, refer to=> [ Backrest Cover ] See: Service and Repair/Removal and Replacement/Front Manual Seats.
-
Remove backrest, refer to Mechanically adjustable seat. Refer to => [ Backrest ] See: Service and Repair/Removal and Replacement/Front Manual
Seats, Power seat=> [ Power Seat ] See: Service and Repair/Removal and Replacement/Power Front Seats.
-
Pry upper fastening strip - 2 - out with a screwdriver.
-
Pry out side clamping strips - 3 - (Qty. 2) using a screwdriver.
-
Pry off lower fastening strips - 6 - (Qty. 3) with a screwdriver.
-
Open cable tie - 5 -.
-
Remove connector - 4 -.
-
Remove cover and upholstery - 1 -.
Installing
To install, perform the steps used in removal in reverse order.
2
Upper Retaining Strip
3
Side Retaining Strips
‹› Qty. 2
4
Electrical Connector Backrest Heating Element
5
Cable Tie
6
Lower Retaining Strips
‹› Qty. 3