A3 Quattro V6-3.2L (BUB) (2008)
When removing make sure that the surface of cylinder is not damaged.
Installing
-
The surface of piston and seal must only be cleaned with mineral spirits and then dried.
-
Thinly coat piston and seal with lithium grease ( G 052 150 A2) before inserting.
-
Insert oil seal into brake caliper.
-
Insert protective seal - A - into assembly tool T10146/6 - 1 -.
-
Press protective cap with assembly tool - 1 - and piston resetting tool - 2 - into brake caliper so that it contacts brake caliper all around.