A3 Quattro V6-3.2L (BUB) (2008)
Brake Caliper: Removal and Replacement
Rear Brake Caliper Assembly Overview
Rear Brake Caliper Assembly Overview
1 - Bolt, 35 Nm
‹› Self-locking
‹› Replace each time it is removed
‹› When loosening and tightening counter hold on guide pin
2 - Bleeder screw, 10 Nm
‹› Apply a thin coat of lithium grease (G 052 150 A2) to threads before screwing in.
3 - Protective cap
4 - Guide pins
‹› Grease before pulling on protective cap
5 - Protective cap
‹› Pull onto brake carrier and guide pin
6 - Brake carrier with guide pins and protective cap