A3 Quattro V6-3.2L (BUB) (2008)
Brake Caliper: Procedures
Rear Brake Caliper
Rear Brake Caliper
‹› When carrying out repairs, install all parts supplied in repair kit.
‹› Only use mineral spirits to clean brake parts.
‹› New brake calipers are filled with brake fluid and pre-bled.
‹› Apply thin coat of lithium grease (G 052 150 A2) to brake cylinders, pistons and seals.
‹› When carrying out repairs it is essential to appropriately pre-bleed the brake calipers (without brake pads) before installing in the vehicle => [
Pre-bleed brake caliper ] See: Overhaul/Piston, Rear Brake Caliper.