A3 Quattro V6-3.2L (BUB) (2008)
-
Remove battery carrier - arrows -.
-
Unhook front of battery carrier at air duct.
-
To protect against escaping brake fluid, place a lint-free rag in area under brake master cylinder.
-
Draw off as much brake fluid as possible from brake fluid reservoir using brake filler/bleeder unit (VAS 5234).
-
Clamp shut supply hose of clutch master cylinder using hose clamps up to 25 mm dia. (3094).
-
Pull off return hose for clutch master cylinder.
-
Disconnect connector at brake fluid level warning switch.
-
Disconnect brake lines - 3 - at brake master cylinder and seal brake lines with sealing plugs from repair kit.