A3 Quattro V6-3.2L (BUB) (2008)
-
For this reason, secure hydraulic pump to the hydraulic unit using the red bracket - 1 - from replacement part kit and two sealing plugs - 2 -.
-
Carefully separate hydraulic unit with hydraulic pump from control module at seam - 1 - and lift upward.
When removing control module, make sure that the hydraulic unit valve body does not bind with solenoid coils of the control module.
- Pos. 2 - Adapter for pump motor.
-
Cover solenoid coils of control module with a lint-free cloth.
After separating control module and hydraulic unit, use transport protection for valve body.