A3 Quattro V6-3.2L (BUB) (2008)
/Page-678006.png)
‹› When turning camshafts, crankshaft must not be at TDC with any piston. Valves and/or pistons may be damaged.
-
Unclip screen - 2 - at backside of control housing - 1 - and remove any contaminants.
-
Lightly oil camshaft seal contact surfaces in control housing.
-
Lightly oil sealing ring contact surfaces of camshafts and carefully slide control housing over camshaft sealing rings.
-
Tighten control housing - arrows -.
-
Install camshaft timing chain (adjust valve timing) => [ Installing the camshaft timing
