A3 Quattro V6-3.2L (BUB) (2008)
Intake Manifold: Service and Repair
Intake Manifold
Intake Manifold
Special tools, testers and auxiliary items required
‹› Drift (T10060)
‹› Puller For Ignition Coil (T10095 A)
‹› Assembly tool (T10118)
Removing
‹› All cable ties which are opened or cut open when removing, must be replaced in the same position when installing.
CAUTION!
Observe safety precautions when disconnecting the battery.
-
Remove tool formed insert under luggage compartment floor covering.
-
Remove cover - arrow - for battery compartment
-
Remove formed insert from over battery.
-
With ignition switched off, disconnect Battery Ground (GND) wire - arrow -.