A3 Quattro V6-3.2L (BUB) (2008)
‹› For pressing on green-colored valve stem seals from delivery program, the (3365) must be drilled to 10.5 mm in dia.
‹› Mark the drilled driver for later reuse.
‹› A plastic sleeve - A - is supplied with new valve shaft seals.
-
Place plastic sleeve - A - on valve stem to prevent damage to new valve stem seals - B -.
-
Lightly coat sealing lips of valve stem seal with oil.
-
Push valve stem seal onto plastic sleeve.
-
Carefully press valve stem oil seal onto valve guide using (3365).
-
Remove plastic sleeve again.
If the valve keys were removed from the installation cartridge, they must be inserted into (VAS 5161/18) next.