A3 Quattro V6-3.2L (BUB) (2008)
/Page-775006.png)
-
Remove bolts - 1 to 3 - and upper timing chain cover horizontally from cylinder head. When doing so, ensure cylinder head bolt is not damaged.
-
Remove bolts - arrows - and remove guide track - 1 -.
-
Remove (T10068 A).
‹› Camshaft bar (T10068 A) must not be inserted when loosening or tightening camshaft adjuster screws.
-
Remove retaining screw at intake side camshaft adjuster while counterholding camshaft hex head with open end wrench SW 32.
