A3 Quattro V6-3.2L (BUB) (2008)
/Page-877002.png)
-
Remove front exhaust pipe at exhaust manifolds - arrows - and slide back slightly.
‹› Oxygen sensors remain installed.
-
Remove 7 nuts each - arrows - at both exhaust manifolds and remove washers.
-
Remove exhaust manifold toward back.
Installing
Installation is in reverse order of removal, note the following:
‹› Replace gaskets and self-locking nuts.
-
Install intake manifold. See: Engine/Intake Manifold
Tightening Specifications
*
Replace nuts.
