A3 Quattro V6-3.2L (BUB) (2008)
Compressor Pulley: Service and Repair
A/C Compressor Belt Pulley, Denso
A/C Compressor Belt Pulley, Denso
‹› This type of belt pulley is installed on a "7 SEU 16" A/C compressor.
‹› Different versions of the belt pulley are installed, depending on A/C compressor construction type and engine version.
‹› Pulley, removing from A/C compressor and re-installing, refer to => [ Belt Pulley, Denso Version 1 ] See: Description and Operation
1 - Screw
‹› Replace
‹› Tightening specification 20 Nm
‹› Loosening and tightening, refer to => [ Belt Pulley, Denso Version 1 ] See: Description and Operation
2 - Drive plate
‹› Removing and installing, refer to => [ Belt Pulley, Denso Version 1 ] See: Description and Operation
‹› the overload protection takes over when the torque is excessive (for example, if the A/C compressor runs with resistance) and the belt pulley
runs freely without driving the A/C compressor.
3 - Circlip
‹› Replace