A3 Quattro V6-3.2L (BUB) (2008)
Glove Box Lamp: Service and Repair
Glove Compartment Lamp
Removing
-
Press in catch - 1 - using a flat screwdriver and pry out glove compartment lamp - 2 -.
-
Disconnect electrical connector - 3 -.
-
To replace bulb, release retaining clips - arrows - and remove cover - 1 - over bulb.
-
Remove bulb - 1 - (12V, 5 W) on back side of glove compartment lamp from socket - 2 -.
Installing
Install in reverse order of removal, noting the following:
-
Connect electrical connector.
-
Insert glove compartment lamp into opening and engage on opposite side.